Author Topic: Color-Splitter type CMOS Chip vs RGB type  (Read 465 times)

Offline dpaul

  • PixInsight Addict
  • ***
  • Posts: 121
    • View Profile
Color-Splitter type CMOS Chip vs RGB type
« on: 2018 February 20 16:34:48 »
Hi

I was reading about the benefits of using a color-splitter for CMOS chips to increase sensitivity, see link below:

https://petapixel.com/2013/02/05/panasonic-doubles-color-sensitivity-in-sensors-with-micro-color-splitters/

However, I'm presuming this means the traditional CFA pattern such as RGGB, BGGR, etc no longer applies. So here are a few questions for my interest:

1/. Can a color splitter chip be used for astro-imaging
2/. Assuming the answer to 1. is a yes, can Pixinsight handle the data in a debayering process?  If the answer to 1. is no then maybe the concept of debayering doesn't exist with color cameras that have color-splitter chips?

Thanks

David







Offline pfile

  • PTeam Member
  • PixInsight Jedi Grand Master
  • ********
  • Posts: 4162
    • View Profile
Re: Color-Splitter type CMOS Chip vs RGB type
« Reply #1 on: 2018 February 20 17:05:20 »
if libRAW can handle such sensors then PI will be able to. juan is testing a new DSLR file handling module which is based on libRAW instead of DCRAW.

rob

Offline dpaul

  • PixInsight Addict
  • ***
  • Posts: 121
    • View Profile
Re: Color-Splitter type CMOS Chip vs RGB type
« Reply #2 on: 2018 February 20 17:56:16 »
Thanks Rob
Don't know much about those two terms - would be good to get some additional comments on whether 'in general' such sensors are used for imaging (even if not using PI)

Thanks

David

Offline CharlesW

  • PixInsight Enthusiast
  • **
  • Posts: 85
    • View Profile
Re: Color-Splitter type CMOS Chip vs RGB type
« Reply #3 on: 2018 February 24 13:10:00 »
This is a lab experiment and a long way away from implementation. Interesting, none the less.