Author Topic: Format output in image calibration  (Read 1153 times)

Offline giulio

  • Newcomer
  • Posts: 5
    • View Profile
Format output in image calibration
« on: 2017 December 16 11:24:50 »
In image calibration I insert all the files in xisf format, but they are saved as fit. How can I set the output format as xisf?

Thank you

Giulio

Offline jkmorse

  • PixInsight Padawan
  • ****
  • Posts: 916
  • Two questions, Mitch . .
    • View Profile
    • Jim Morse Astronomy
Re: Format output in image calibration
« Reply #1 on: 2017 December 16 18:39:30 »
Giulio,

Click on the "Edit" button on the top left, then click on "Global Preferences".  About 5 items down, you will find "File I/O Settings".  Click on it.  There, under "Default Save As image file extension" change the file type to ".xisf"

That should do it.

Best,

Jim
Really, are clear skies, low wind and no moon that much to ask for? 

New Mexico Skies Observatory
FLI Microline 16803
Planewave CDK17 - Paramount MEII
Planewave IFR90 - Astrodon LRGB & NB filters
SkyX - MaximDL - ACP

http://www.jimmorse-astronomy.com
http://www.astrobin.com/users/JimMors

Offline giulio

  • Newcomer
  • Posts: 5
    • View Profile
Re: Format output in image calibration
« Reply #2 on: 2017 December 16 23:17:22 »
Thank you Jim,
I checked "File I/O Settings" and "Default Save As image file extension" is set to ".xisf" already! So there must be something else to set up.

Giulio

Offline giulio

  • Newcomer
  • Posts: 5
    • View Profile
Re: Format output in image calibration
« Reply #3 on: 2017 December 17 01:49:53 »
The same happens with "star alignment" : input is xisf, but output is fit!!

Offline Alejandro Tombolini

  • PTeam Member
  • PixInsight Jedi
  • *****
  • Posts: 1265
    • View Profile
    • Próxima Sur
Re: Format output in image calibration
« Reply #4 on: 2017 December 17 04:53:42 »
Hi Giulio, which version of PixInsight are you using?
Saludos,  Alejandro

Offline giulio

  • Newcomer
  • Posts: 5
    • View Profile
Re: Format output in image calibration
« Reply #5 on: 2017 December 25 10:52:27 »
Hi Alejandro, sorry for the delay, version is 01.08.05 Ripley

Offline pfile

  • PTeam Member
  • PixInsight Jedi Grand Master
  • ********
  • Posts: 4392
    • View Profile
Re: Format output in image calibration
« Reply #6 on: 2017 December 25 11:08:53 »
see this thread: https://pixinsight.com/forum/index.php?topic=11945.msg73455#msg73455

if you are using an old process icon to launch ImageCalibration the output format can be set to fits but you can not change it back in the GUI. solution - stop using the old process icon and make a new one.

rob

Offline giulio

  • Newcomer
  • Posts: 5
    • View Profile
Re: Format output in image calibration
« Reply #7 on: 2017 December 25 13:57:58 »
Thanks Rob!! This is working! :D

Offline pfile

  • PTeam Member
  • PixInsight Jedi Grand Master
  • ********
  • Posts: 4392
    • View Profile
Re: Format output in image calibration
« Reply #8 on: 2017 December 25 20:42:16 »
 :D