Hi,
reset the parameters once, at least the ones of Image Integration!
Hi @sbenz,I put it here.
Let me know, if you have access.
Hi @sbenz,
the issue I see is that this file is recognized as a flat frame from the fits header since the IMAGETYP value is "Flat frame". (next time ensure you categorize the frame properly )
The smart naming override requires overriding the IMAGETYP keyword to replace the value with a correct one, so you have to add "IMAGETYP_Dark" to the file name like this, for example:
FlatDark 6822_F_0571_2.75s_G0__-10C_IMAGETYP_DARK.fit
Once done, if you check the "smart naming override" and add the file, it is interpreted as a dark frame.
The best solution, anyway, is to batch-change the value of the FITS header IMATETYP to "Dark frame"
yes, WBPP enables or disables that checkbox depending on the group. In images are CFA then the checkbox is set before running that CC instance, otherwise is unchecked.Robyx, I've noticed that the script has accepted CosmeticCorrection templates for OSC that don't have the option checked. Been that way for a while.
Mike, I believe those are indicators only, reflecting what you've chosen in the actual panels. Deselect them there, and that will be reflected in the spot you've circled.Good morning all.
Question for folks, has anyone run into the inability to deselect one of these Active Steps in WBPP circled below?
I tried to deselect Image Integration and realized none of these will uncheck. Even when fully populated with appropriate files.
I'm thinking I'm missing something.
Thank you for your help!
Mike
Ahhh! Right you are! Thank you!!!Mike, I believe those are indicators only, reflecting what you've chosen in the actual panels. Deselect them there, and that will be reflected in the spot you've circled.