Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - paulsartory

Pages: 1 [2]
16
No, I don't put any frames in the bias tab.

17
Hi Michael,

Thanks for your rapid response.

Typical workflow is:

For lights and darks

CCD Gain set at 139 (equivalent to unity gain) offset 21

NB light frames 120secs @-10c

Master dark created using image integration module from uncalibrated dark frames (no bias calibration)

For flats


CCD Gain set at 300 (equivalent to x6.5) offset 50. I need this gain using a flipflat on a f8 refractor to to reach 20,000adu5scs for NB filters in less then 5secs

NB Flats taken -10c (cooling probably not necessary)

Create master bias from bias frames taken at same gain and temperature as flat

Bias calibrate flats using image calibration module

Create master flat using image integration module

Calibration

At this point I calibrate the light frames manually using the image calibration module using the appropriate master dark and flat (but no bias) and not checking the "optimize" and "calibrate" boxes associated with each master.

BatchPreprocessingFD module settings

I would like to use the BPP if I can for speed and ease of convenience (automatic directory creation etc)

I populate the tabs as follows...Lights, matching master dark and appropriate filter master flat.

Check "Bias frames are dark flats", "Use master dark", "Use master flat".
Uncheck "optimize dark frames"

I am hoping that this will achieve what I do manually. however I do notice some over correction of amp glow in the integrated stretch result compared with my manual process.

With regard to the desktop process icon I have tried both checked and unchecked with same result.

I have sent the INI file to the email address you provided

Paul
 

18
Hi Mark (it is Mark?)

I use an ASI1600mm that has particular linearity issues relating to calibration.

So a quick question....just to make sure I understand your BPP modification and the application of FDs.

I need to calibrate my flats with bias frame only before calibrating my lights.......I think this is what you FDs do.

I do NOT want to bias calibrate my darks or lights. These are matched in temp, duration and gain.

btw when I try to start it from a workspace icon I get the following error:
*** Error [000]: C:/Users/pauls/Downloads/BatchPreprocessingFD(1)/BatchPreprocessingFD-engine.js, line 1906: Error: Parsing integer expression: conversion error:
undefined

Cheers
Paul

19
Thanks Juan,

That sorted it.....I must have unchecked it inadvertently :-[.

Paul

20
Bug Reports / BatchPreprocessing not retaining calibration files
« on: 2017 August 26 21:14:28 »
Suddenly my BatchPreprocessing script is no longer retaining the populated calibration files if I save as an instance on my workspace, close down script and the reopen it....any ideas?

I am running the latest PI update and BP v1.46

Paul

21
Gallery / Helix Nebula from Perth, Australia
« on: 2016 November 09 00:49:02 »
Hi all,

My second offering to the gallery.

4 hrs each of Ha and O3....I did have a couple of hours of S2 but it only added noise so I didn't use them.

All processed in pixinsight.....HOO palette using the SHO_AIP script.....the Colormask script is great tool for selective color saturation and masking for controlling noise in the stretched colour image.

Equipment details:

127mm HiOptic APO with 0.8x focal reducer.
Baader NB Filters
ASI1600mm Cooled Camera.

Paul
http://paulsartory.com/

22
Gallery / IC4628 Prawn Nebula 29-31/8/16 Narrow Band False Colour
« on: 2016 September 06 00:53:43 »
Hi,

I have been using Pixinsight for about 5 years now mostly on RGB images and then HaRGB before recently taking the plunge into narrowband imaging.
Image details are as follows:

127mm APO,
ASI1600mm (cooled to -20c)
Resolution: 0.82"/Pixel
Baader filters.
Ha 7nm 3hrs
S2 8nm 1.5hrs
O3 8nm 1.5hrs
(All 600sec subs)

Processing Brief:
Mure denoise
ABE
Histogram stretch
SHO-AIP Script to construct luminance and combine into final image.
Endless tinkering to get colours as near RGB as I could (at least to me?) but I think the red intensity is reversed!!!
Tried various methods to equalize star size of S2 and O3 but ended up masking and desaturating them.

All comments welcome ...especially on palette selection and star correction.

http://pixinsight.com/forum/index.php?action=dlattach;topic=10177.0;attach=12197;image

Paul
http://paulsartory.com/

Pages: 1 [2]