Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - astroedo

Pages: [1] 2 3 ... 11
1
Announcements / Re: PixInsight 1.8.6 Ripley Released
« on: 2018 December 17 04:22:02 »
Good Job Juan,
Happy to see the new licensing system and the nice news.

Only one question: where can I find the new SubframeSelector tool? the one under Script-Batch processing seems to be the old one.

2
Image Processing Challenges / Re: Image Calibration Problem
« on: 2018 October 06 13:55:15 »
It happens when the image sizes are different.

In my case happaned only one time with a Canon Camera:
In that case the problem came because I took the light and the flat frames using Maxim DL (saving in FIT) and the dark frames (Light dark and flat dark) directly in camera (Format CR2).

The problem was the same and I haven't found a solution yet.

Is your problem similar?

3
Hi,
I've tried to align your pictures.

The problem is that they are completely out of focus, the stars have a donut shape an even with Peak Response set to 1 it is impossible to match the stars.
The out of focus problem has a secondary drawback: due to the ling focal length, yoo can see only a few stars so PI cannot get a suitable set of putative stars.

I'm sorry but I suppose that the only way to aling your set is to performa one by one alignement with DynamicAlignement.

Bye

Edoardo

4
Bug Reports / Re: CometAlignment - SubtractImage bug ?
« on: 2018 September 17 02:36:56 »
Hi, I successfully subtracted the comet image.
Try to DISABLE normalization and Weighting in ImageIntegration when you perform the integration of the "starless" comet.

Then activate "Normalize" and deactivate Linearfit in CometAlignement when you perform the subtraction.

I've published a Video tutorial on this, unfortunatey it's only in Italian, but I hope that you can follow the video.

https://www.youtube.com/watch?v=RmgjvC8c_yc

5
Tutorials and Processing Examples / Videotutorial on Comet processing
« on: 2018 September 12 15:17:30 »
Dear friends,
here my latest video tutorial on Comet processing.

Unfortunately it is only in Italian, but it is quite self-explicative, so, I hope, you can still enjoy it.

https://www.youtube.com/watch?v=RmgjvC8c_yc


Best regards

6
Bug Reports / Radial Symmetries in DBE
« on: 2018 September 09 12:59:55 »
Hi PI Team,

I was experimenting with Symmetries on DBE and I've found a strange behavior on astronomical images, so I've tried with "synthetic" gradients.
It seems, when symmetries are used, that the resulting gradient is image size-ratio dependent.
As you can see on the attached images, i've created a symmetric circular gradient.
On a square image the resulting DBE gradient is circular.
With the same sample geometry, on a rectangular image, is elliptic.

Am I making something wrong or is it a BUG?

Thank you

7
Bug Reports / Problem with PhotometricColorCalibration
« on: 2018 August 26 04:59:53 »
Hi all,
I'm Trying to use PCC with an image of the Veil nebula.

I've used PCC before without problems and I know quite well the process, but now, with this image, it fails.
The procedure goes well almost to the end, but at the very end PI tells me

*******************************
Photometry process finished:
   3 of 3 images processed successfully.
   0 images with errors.

*** Error: Insufficient photometric data: Got 0 sample(s); at least 5 are required.
Reading swap files...
1830.416 MiB/s
<* failed *>
I've tried with different servers and setting, but the problem seem to be only teh color calibration data in this area of the sky.

I cannot figure out why.

Thank you for any help.

Edoardo

8
General / Different Behaviour on HDTMT in preview and Image
« on: 2018 May 16 13:50:27 »
Hi all,

I'm processing an image of the M106 region.
It is a 2490x1882 image, a Halpha - RGB composition, taken by me (16 hours of Halpha) and a friend (3 hours of RGB with an OSC).

As a part of my processing workflow, I'was using HDRMultiscaleTransform to popup the details on the very center of M106 and, as usual, I've tried  the settings on a small preview around M106.

When found the best setting, I've applied the Process to the whole image but, with my great surprise, the result was VERY different from that on the preview, as you can easily see on the attached images.

The Image was non linear (HT + MS + Curves)
HDRMT setting was

6 Layers, 1 iteration, Median Transform active, Preserve Hue Active, Lightness Mask Active.
An additional, very blurred, Lightness mask was applied.

Even stranger, if I perform the very same operation, on the RGB image only, HDRMT performs as expected with no differences between preview and Image.

Hints?

By the way, this is the final image

9
Announcements / Re: A programming genius
« on: 2018 May 16 13:01:03 »
It's vary sad that such smartness is used to perform criminal acts.

I tried to report the video, but YoutTube allows to do it only to the owner of the "brand".
The only thing that I've done is to click con the dislike button.

But please Juan, delete this thread from the forum, there is A LOT of people that would cheat if he can, so don't help them!

Best regards

Edoardo

10
Bug Reports / Re: "Access violation" PI will not open?
« on: 2018 February 26 14:55:13 »
Thank you Mike for your advice,
At the moment I've solved the problem installing the previous version of PI (01.08.04.1195): this is not a big issue for me since Im' using PixInsight on ths PC only as an advanced "image viewer".


Bye

Edoardo

11
Bug Reports / Re: "Access violation" PI will not open?
« on: 2018 February 25 15:26:20 »
Hi all,
I've got the same problem on my new mini PC (is only for use with telescope, but it would be great having PixInsight running for some very basic processing):

It is an Intel Atom, with 8 GB RAM and a 64 GB SSD Disk (Yes! it's very small  :D ) more then half empty.

It's a brand new installation of Window 10 64 bit.

I always have "Access violation: invalid memory read operation at address 00000000000000" un startup, a few seconds after "Creating Workspaces" appears on the "splash screen".

I cannot figure out how to make it work.

Pi runs smoothly on my Other PC and laptop.

Ideas?

Thank you Edoardo


12
Gallery / Re: 2017 eclipse - HDR
« on: 2017 August 28 12:28:10 »
Wonderful image!

I'm trying to process a few images from a friend (unfortunately I wasn't in the US  :'( )
I can align images with FFTRegistration and easily create the HDR image, but, when I try to compress the dynamic range with HDRMultiscaleTransform I get a Bright ring aroun the Sun.

Probably the wavelet based HDRMT gives a sort of ringing effect cause by the fast drop in luminosity near the moon edge.
If I reduce the number of layers, the bright ring, shrinks but never disappears.

As a reference I'm uploading a sample image (it's a single shot not the HDR one, but the effect is the same).

Do you have any hint on how to manage this problem?

Thank you

Edoardo

13
General / Re: asking advice about ubuntu vs Windows 10 version
« on: 2017 August 21 08:59:40 »
Thank you Juan for your precious information.
What do you think about UBUNTU with GNOME interface?
I've practically no experience with linux


Quote
PixInsight should run on this machine, but it will put everything to the very limit, especially with version 1.8.5. I strongly recommend you try to upgrade your processor and RAM. Even a Core i5 will run much faster with 8 GB of RAM.

Consider that this notebook is the "on the field processing" machine.
I use it only for fast processing on the field or for the workshops that I perform in northern Italy.

My processing PC is a I7 7700 with 32 GB of RAM and a SSD Hard disk.

14
General / asking advice about ubuntu vs Windows 10 version
« on: 2017 August 19 08:31:57 »
Hi all,

I'm formatting and reinstalling my old notebook.

It is an ASUS notebook with a INTEL CORE DUO processor and 4 GB RAM + 1 GB Graphic RAM.
My main O.S. is Windows 10 64 Bit where PixInsight runs decently and I'm happy about it, but I was evaluating the idea of making a multiboot system with Ubuntu (or Xubuntu, Lubuntu that seems lighter for my old machine).

- Has someone tested Linux PI Version compared with windows version on the very same machine?
- Which system has better performances? (If one in better than the other)
- In your opinion, is my idea good or fool?
- Are there other Free Linux distributions more suitable for this job?

Thank you in advance for your help.

Edoardo

15
General / Linear "L" RGB Combination
« on: 2017 March 05 10:27:54 »
Hi All,

it is a bit of time that I'm trying to find a way to make an "L" RGB combination at linear stage.
We all know that the real LRGB combination must be done on NON linear images, matching the luminosity profile of the L image with the RGB one and combining in with the LRGBCombination Process (or Channel Combination); this because the CIE Lab color space is nonlinear, so we cannot use a linear L.

Googling on the internet I haven't found any solution, except an old post here on the forum

https://pixinsight.com/forum/index.php?topic=2485.0

where Juan suggests a method to combine a linear L with RGB.
Unfortunately I haven't managed to make it work: on my images this method creates horrible Green and magenta artifacts (don't know if I'm doing something wrong).

So I've tried to find a solution by myself, and, maybe, I've found it.

This is my workflow:

I have 4 images: R G B and "L"

  • RGB combination with ChannelCombination
  • BackgroundNeutralization
  • ColorCalibration
  • Extract I Channel from HSI color space with ChannelExtraction
  • Use LinerFit on "L" using  I  as reference
  • Insert fitted "L" in RGB image with ChannelCombination (Use HSI color space deselect H and S checkboxes and use "L" as I )
Thats all folks!  :D

Processing the image the final result is practically Indistinguishable from a normal LRGB.
The I component of the HSI color space is a linear combination of RGB so it is linear and can be combined at linear stage.

We can call it IRGB Combination instead LRGB.  ;)

What do you think about this workflow?
Am I doing somthing wrong?

Bye

Edoardo

Pages: [1] 2 3 ... 11