« previous next »
Pages: [1]

Author Topic: ASI1600 PI won't batch debayer  (Read 3476 times)

Offline RenaudVL

  • Newcomer
  • Posts: 14
ASI1600 PI won't batch debayer
« on: 2016 July 25 14:47:59 »
First light was perfect, second light, same setting Batch Prossessing nor Batch Debayer is working!!!

Manual one by one debayer does work!!!

Any idea!

Thanks
Logged

Offline vicent_peris

  • PTeam Member
  • PixInsight Padawan
  • ****
  • Posts: 988
    • http://www.astrofoto.es/
Re: ASI1600 PI won't batch debayer
« Reply #1 on: 2016 July 25 15:05:59 »
Hi,

We would need to have some sample images, could it be possible?


Thanks,
Vicent.
Logged

Offline RenaudVL

  • Newcomer
  • Posts: 14
Re: ASI1600 PI won't batch debayer
« Reply #2 on: 2016 July 25 22:22:23 »
Logged

Offline RenaudVL

  • Newcomer
  • Posts: 14
Re: ASI1600 PI won't batch debayer
« Reply #3 on: 2016 July 26 07:03:36 »
New info,

The debayer script work fine on none calibrated files, it is on calibrated files that it is not working.
I suspect that there is something wrong with my dark and bias, I am redoing them....
Logged

Offline RenaudVL

  • Newcomer
  • Posts: 14
Re: ASI1600 PI won't batch debayer
« Reply #4 on: 2016 July 27 10:54:39 »
Still no success, I have made a fresh set of calibration files and same problem...

Any ideas out there???
Logged

Offline vicent_peris

  • PTeam Member
  • PixInsight Padawan
  • ****
  • Posts: 988
    • http://www.astrofoto.es/
Re: ASI1600 PI won't batch debayer
« Reply #5 on: 2016 July 27 12:23:54 »
Hi,

I just tried the Debayer tool and the BatchDebayer script and they work fine. If the problem is on the calibrated images, I would need to have one of those to test.


Best regards,
Vicent.
Logged

Offline RenaudVL

  • Newcomer
  • Posts: 14
Re: ASI1600 PI won't batch debayer
« Reply #6 on: 2016 July 27 12:40:41 »
Vincent,

Yes it worked fine for me too on non calibrated...

I just added my master calibration files in the folder...

Thank you

Renaud
Logged

Offline vicent_peris

  • PTeam Member
  • PixInsight Padawan
  • ****
  • Posts: 988
    • http://www.astrofoto.es/
Re: ASI1600 PI won't batch debayer
« Reply #7 on: 2016 July 27 14:48:13 »
Hi Renaud,

The first link to Dropbox links directly to the fits file, not to the folder.

V.
Logged

Offline RenaudVL

  • Newcomer
  • Posts: 14
Re: ASI1600 PI won't batch debayer
« Reply #8 on: 2016 July 27 14:51:59 »
Logged

Offline vicent_peris

  • PTeam Member
  • PixInsight Padawan
  • ****
  • Posts: 988
    • http://www.astrofoto.es/
Re: ASI1600 PI won't batch debayer
« Reply #9 on: 2016 July 27 15:37:10 »
Hi Renaud,

It's working for me. I attach the BPP process icon, there you have all the settings for your CFA camera.

By the way, you have an additional problem with your master calibration frames. When I ran BPP, it didn't find a dark scaling factor. I found that the dark is vertically mirrored. I don't know why!? I'm not sure if you master bias and flat will be also mirrored... Please check it. It's not a problem with PixInsight, as it does not do this opperation at any moment during the preprocessing. I suspect that it could be a problem with your acquisition software.


Best regards,
Vicent.
Logged

Offline RenaudVL

  • Newcomer
  • Posts: 14
Re: ASI1600 PI won't batch debayer
« Reply #10 on: 2016 July 27 16:03:15 »
Thank you Vincent,

I will look into this and report back...

I am using SGP and it did ran into some issues, but a new ASCOM driver just came out for my camera, it could be part of the solution

Regards

Renaud
Logged
Pages: [1]
« previous next »