Help please- Flat Issues

[AstroMatt]

All of a sudden, my Green and Blue flats are not taking out the motes or vignetting.  I've had ZERO issues, but made several updates to my camera driver and am thinking it's a software problem.  I've ran it BPP and integration/calibration separately to no avail. 

Here are my files: https://www.dropbox.com/s/4lnq1f6y15zf454/16200Help.zip?dl=0

Also, I'm on a WO 132 refractor with a QHY 16200A camera.  I capture with SGP and calibrate with Pixinsight.  It's been flawless up until this month.  Kinda scratching my head at this point so any help would be GREATLY appreciated. 

[pfile]

did you get new bias/darks after the camera firmware update?

rob

[AstroMatt]

Yes.  I did.

[AstroMatt]

Whatever this is, it just started.  I've had zero issues. 

I'm really just trying to see if I've got a corrupted piece of software of if my flats are messed up. I have a flip flat and the calibration setup has been run with 25k ADU flats.  I re ran it at 35k and it's the same deal. Dust mites in the B & G channels.  The L and HA are fine.

[pfile]

well what happens if you get new lights? dust does move/settle/appear from time to time.

rob

[CosmicWreckingBall]

Well, I mean, the motes do disappear after LRGB combination, but it's either overcorrecting or under correcting and I'm just confused as to why that would be.  Q hasn't responded as to whether it could be a driver issue in terms of gain/offset settings in the driver.