Integration problem

[JGMoreau]

Hi, i am having problems with integration in BPP.
Console is returning "empty image" message
Camera is cmos QHY163C, and i use 2 to 5 minutes exposures, captured with Nebulosity.
No such issues with my QHY10.
Some setting i should change obviously, because sometimes it works with nice results.
Can somebody help me with this ?
Thanks in advance,

Jean Guy Moreau
Eastman, Québec

[vicent_peris]

Hi,

Could you please upload 3 raw frames?

Thanks,
Vicent.

[JGMoreau]

Hi Vincent, thanks for getting back so fast.

I must admit there is not much signal in the images, just a star field and some very faint reflection nebulae,
but nevertheless there must be a way to integrate the subs.

Here are 3 raw subs of 2 min. exposure with the 163C camera :

https://dl.dropboxusercontent.com/u/97102214/vdb15_006-182601_007.fit

https://dl.dropboxusercontent.com/u/97102214/vdb15_006-182807_008.fit

https://dl.dropboxusercontent.com/u/97102214/vdb15_006-183012_009.fit

JG Moreau
Québec

[JGMoreau]

Sorry to jump the gun, but I got the same problem again, this time with an image with lots of signal, M42.

Console reports self contradictory statements about noise computation....

BPP with all default settings.

JG Moreau

[TobiasLindemann]

Hi JG,
I can not use the batchprocessing script, because I have no calibration files for your images, but in manual mode it works for me. Have you tried to reinstall PI?

Greetings
Tobias

[JGMoreau]

Hi Tobias, thanks for working on my problem.
I think its a master calibration frames issue because i was able to get BPP running
by making new masters with gain = 0 instead of gain = 2 as previously.
I think I mixed both in BPP.
The camera is so sensitive, it does not need any amplification, and i avoid ampglow.
Thanks again,

JG Moreau
Québec