PixInsight Forum (historical)

PixInsight => General => Topic started by: bfalls on 2020 February 26 22:02:45

Title: Calibrated frames are completely clipped
Post by: bfalls on 2020 February 26 22:02:45

https://drive.google.com/drive/folders/1ES6rErrSGOcb0bMfEz9WL7VplB_xAQHY?usp=sharing

Here is a link to the data^

These images were taken with the QHY367c at -10C, at standard DSO gain and offset. Bias and darks acquired the usual way, and flats acquired off of a flat panel. My data when calibrated is completely clipped. These calibration frames have not been calibrated themselves, I was allowing the ImageCalibration tool to calibrate the flats. I got the same results from BPP, everything is clipped and black. A bit confused because last time I just dumped everything into BPP and it all worked. I think something might be wrong with the lights, but they appear to be completely fine? I'm at a loss here and would really appreciate any help.

Thanks

Title: Re: Calibrated frames are completely clipped
Post by: bfalls on 2020 February 26 22:11:53

I just realized I'm almost certain that TheSkyX reset my gain values when I ran a pointing model.