PixInsight Forum (historical)

PixInsight => General => Topic started by: frasax on 2020 January 23 10:25:05

Title: CR3 RAW Data issue
Post by: frasax on 2020 January 23 10:25:05

Hi,
i´m testing the new Canon EOS Ra and run into Problems, using the BatchPreprocessingScript.

The other Day i had no Problems, but today i get two strange errormessages and behaviors (updatet 3 updates yesterday, so i think it might be a bug).

First Errror Message: No Convergence or in RMS Noise Evaluation routine using k-sigma routine
2n error Message: zero or insignificant Signal detected (empty image?)

And yes, the Image Files seem to be heavily corrupted.

Any Ideas anyone?
Thanks in advance.

CS Frank

Title: Re: CR3 RAW Data issue
Post by: pfile on 2020 January 23 11:30:23

this is probably a calibration problem - did you recreat the master dark/bias or are you using older ones?

rob

Title: Re: CR3 RAW Data issue
Post by: frasax on 2020 January 23 11:48:16

Hi Rob,

first i´ve tried one i´ve created before. After the First Fail i´ve started from the Top and created a new Masterbias in the Process.
CS Frank

Title: Re: CR3 RAW Data issue
Post by: pfile on 2020 January 23 12:07:26

and that is failing too? or it resolved the problem?

rob

Title: Re: CR3 RAW Data issue
Post by: frasax on 2020 January 23 12:24:18

that is failing too, yes.